- Horizontally adjustable GateStop for large gates
• Gate stops at 85º to prevent damage to hinge-closers
• Reduces wear on the gate and lessens need to adjust hinges
• Semi-soft rubber bumper minimizes gate bounce-back
• Weld or fasten - 12g Tek screws included (no need to grind off before welding)
• Custom finish rated to 1,000 hours of salt-spray and 500 hours UV
• Stainless steel components
• Horizontally adjustable to ensure maximum opening of 85°
Product Shipping Dimensions
Weight | N/A |
---|---|
Length x Width x Height | N/A |
Reviews

MARY (VERIFIED OWNER) -
Verified review -view original
Great addition to the backyard! Took 3 weeks to arrive, but was delivered right to the backyard.

MARY (VERIFIED OWNER) -
Verified review -view original
Great addition to the backyard! Took 3 weeks to arrive, but was delivered right to the backyard.

MARY (VERIFIED OWNER) -
Verified review -view original
Great addition to the backyard! Took 3 weeks to arrive, but was delivered right to the backyard.

MARY (VERIFIED PURCHASE) -
Verified review -view original
Great addition to the backyard! Took 3 weeks to arrive, but was delivered right to the backyard.

MARY (VERIFIED OWNER) -
Verified review -view original
Great addition to the backyard! Took 3 weeks to arrive, but was delivered right to the backyard.

MARY (VERIFIED OWNER) -
Verified review -view original
Great addition to the backyard! Took 3 weeks to arrive, but was delivered right to the backyard.

MARY (VERIFIED OWNER) -
Verified review -view original
Great addition to the backyard! Took 3 weeks to arrive, but was delivered right to the backyard.
Product Warranty
1. GENERAL CONDITIONS
These Warranty conditions apply to all products manufactured by D&D Technologies ("D&D”) except MagnaLatch® ALERT Gate Alarm (module), KwikFitTM Aluminum Gate Hinges, SureClose®Gate Closers & Hinges, Shut It® Gate Hardware range, D&D Wood Gate Hardware range and D&D Stainless Steel Gate Latches and Hinges. See Section 3 below for specific Warranty details applying to these six product lines.
1.1. Subject to the conditions and limitations set out below, D&D warrants that for so long as the original purchaser (the "Purchaser”) of a product manufactured by D&D owns that product (the "Product”) it will be free from all defects due to faulty design, materials or workmanship.
1.2. If a defect in the Product appears the Purchaser must advise D&D within 14 days of discovering the defect and return the defective item, comprising either the Product or the defective component of the Product (the "Item”) to D&D or its agent, freight prepaid, together with proof-of-purchase, whereupon D&D will, at its option and cost, repair or replace the defective Item with the same or an equivalent Product or component. D&D will not be liable for labour or any other costs associated with the dismantling, return or re-assembly of the Product or any frame or structure to which it is affixed.
1.3. This warranty does not apply in respect of
defects due to, or arising from:
a.normal wear and tear;
b.the failure to follow any procedures specified
or recommended by D&D for the installation,
operation and maintenance of the Product;
c.any act or circumstance beyond D&D’s control,
including tampering, unauthorized repairs,
misuse, abnormal use, abuse, accident, damage
after delivery to the consumer, damage caused by
events beyond human control, including, but not
limited to, damage caused by animals or natural
events, surface tarnishing, cosmetic or appearance
damage and/or damage to components caused
by corrosion, weathering or other environmental
conditions;
d.Staining or "tea staining” of stainless-steel
components, parts or assemblies, is a natural
process that may happen to any stainless-steel
products if not cleaned regularly. Stainless steel is
not stain-free, but stains less than ordinary carbon
steel;
e.any defect of, or in, any framework or material
supporting the Product; or
f.the faulty workmanship of any person other than
D&D, including the installer of the Product.1.4.Keys used in D&D’s products are excluded
from the Warranty. A separate 12-month warranty
applies to keys from the date of purchase, where
D&D warrants the keys to be free of defects inmaterial and workmanship during this specified period.
1.5. This warranty is personal to the Purchaser of the Product, or to the first consumer, where the product has been installed by a contractor for the benefit of the consumer and may not be assigned without D&D’s prior written consent.
1.6. This warranty gives the Purchaser specific legal rights which are in addition to, and do not replace, other rights and remedies you may have at law and which may vary from state to state (provinces or territories) in your jurisdiction.
1.7. Except as expressly granted in this warranty or where to do so would contravene a law in the Purchaser’s jurisdiction, D&D’s liability as regards any contractor is limited in respect of all other loss, damage or injury of any kind whatsoever (including any direct, indirect or consequential loss or damage, loss of profits or loss of opportunity)arising in connection with the Product, or the supply, condition or use of the Product, including as a result of any negligence, misrepresentation or other default on the part of D&D, its officers,employees, agents or contractors or otherwise, to the value paid by the contractor for the Product giving rise to loss, damage or injury.
For any specific questions about the D&DTechnologies Warranty, or to make a warranty
claim, please visit our website at www.ddtech.comto locate your nearest D&D Technologies office. Orcontact D&D Technologies in:
NORTH & SOUTH AMERICA:
on (800) 716 0888 or (714) 677 1300. Email: info@ddtechusa.comAUSTRALIA: on (02) 9454 7800. Email: sales@ddtech.com.auEUROPE: on +31 (0)30 291 98 47. Email sales@ddtech.nl
UNITED KINGDOM: on +31 (0)30 291 98 47. Email sales@ddtech.nl
2. JURISDICTION SPECIFIC WARRANTY DETAILS
The Warranty details in this section apply to the jurisdictions identified below in addition to the conditions in Section 1.
2.1. North America:
In North America, some States /Provinces/
Territories do not allow the exclusion or limitation
of incidental or consequential damages, so the
exclusion in 1.7 may not apply to the Purchaser in
those States/Provinces/Territories.
2.2. Australia:
In Australia, the Product comes with guarantees
that cannot be excluded under the Australian
Consumer Law (the "ACL”). The Purchaser
is entitled to a replacement or refund for a
major failure and compensation for any other
reasonably foreseeable loss or damage. The
Purchaser is also entitled to have the Product
repaired or replaced if the Product fails to be of
acceptable quality and failure does not amount to
a major failure. To the extent permitted under the
ACL and equivalent legislation, D&D’s liability for
failure to comply with the consumer guarantees
under the ACL (other than Sections 51, 52 and 53
of the ACL) in respect of the supply of the Product
not of a kind ordinarily acquired for personal,
domestic or household use or consumption is
limited, at D&D’s option, if the failure relates to the
supply of the Product, the replacement, repair or
payment of the cost of replacement or repair of
the Product.
2.3. United Kingdom:
In the United Kingdom, the Purchaser purchasing
the Product has rights that cannot be excluded
under the Consumer Contracts Regulations and
the Consumer Rights Act.
2.4. Europe:
In Europe, the Purchaser may have additional
rights under the EU Regulations, EU Member State
laws or directly applicable EU Directives.
2.5. South America:
In South America, the Purchaser may have
additional rights under their respective national
and/or jurisdictional divisions as per 1.6 and
should be consulted as needed.
3. PRODUCT SPECIFIC WARRANTY DETAILS:
In addition to any rights or remedies expresslygranted by law, D&D also offers the following
product specific warranties:
3.1. MagnaLatch® ALERT Gate Latch-Alarm:This Product has three (3) components whichattract the following different levels of warrantysupport:
(1) MagnaLatch® mechanical gate latch – D&D’s Limited Lifetime Warranty applies – see Sections 1and 2 (as applicable to your specific jurisdiction).(2) ALERT Alarm & Electronics (module) – two (2) years after purchase – see Section 3.2 below.
(3) Battery – no warranty applies.
3.2. ALERT Alarm & Electronics (module).
D&D, at its discretion, will repair, replace or make appropriate adjustments where D&D’s inspection discloses any such defects in the ALERT Alarm &Electronics occurring in normal usage as classifiedabove within two (2) years after purchase.
3.3. KwikFitTM Aluminum Gate Hinges – covered by a 2-Year Warranty. D&D, at its discretion, will repair, replace or make appropriate adjustments where D&D’s inspection discloses any such defects in the KwikFitTM Aluminum Gate Hinges occurring in normal usage within two (2) years after purchase.
3.4. SureClose® Gate Closers & Hinges – covered
by either a 2- or 5-Year Warranty depending on
the following application categories:
Category A: Low and/or moderate trafficapplications. Applications including uses in
single or multi-family residential, commercialoffice buildings, schools, hospitals, homeownerassociation pools, small hotels and motels and other similar moderate-use applications are covered by a 5-year Warranty.
Category B: High-traffic applications. Applicationsincluding uses in theme parks, railway stations, ports, public parks, hotel resort pools, parkingfacilities and other high-traffic applications arecovered by a 2-year Warranty.
Maintenance and Serviceability: To ensure longer life, all SureClose® products should be maintained in accordance with D&D maintenance instructions. SureClose® Gate Closers & Hinges are designed with serviceable parts to extend life of the application. Replacement hydraulic cartridges are available from D&D Technologies.
Warranty shall be void on SureClose® Closers
& Hinges that are used on gates outside the
recommended product weight and dimensionalspecifications. See Sections 1 and 2 (as applicable
to your specific jurisdiction). D&D, at its discretion,will repair, replace or make appropriate
adjustments where D&D’s inspection discloses
any such defects in the SureClose® Gate Closers &Hinges occurring during usage within the specifiedperiod from the date of original purchase.
3.5. D&D Wood Gate Hardware range – covered
by a 10-Year Warranty, with the exception of the
springs, which have a 5-Year Warranty:
D&D, at its discretion, will repair, replace or make
appropriate adjustments where D&D’s inspection
discloses any such defects in the D&D Wood Gate
Hardware range occurring in normal usage within
two (2) years after purchase.
3.6. Shut It® Gate Hardware range – covered
by the D&D Limited Lifetime Warranty with
the exception of the bearings and bearing
components, which have a 5-Year Warranty:
D&D, at its discretion, will repair, replace or make
appropriate adjustments where D&D’s inspection
discloses any such defects in the Shut It® Gate
Hardware range occurring in normal usage withinthe specified period after purchase.
3.7. D&D Stainless Steel Gate Latches & Hinges
– covered by 2-Year Warranty.
D&D, at its discretion, will repair, replace or make
appropriate adjustments where D&D’s inspection
discloses any such defects in the D&D Stainless
Steel Gate Latches & Hinges occurring in normal
usage within two (2) years after purchase.
To ensure the expected life of any D&D products, the products should be maintained in accordance with D&D’s maintenance instructions and requirements and operated in accordance with the application and For a downloadable (PDF) version of our Warranty information, go to our website at
www.ddtech.comAUSTRALIA: (02) 9454 7800.
Email: sales@ddtech.com.au
NORTH & SOUTH AMERICA:
T: (800) 716 0888 or (714) 677 1300 Email: info@ddtechusa.com
EUROPE:
T: +31 (0)30 291 98 47. Email: sales@ddtech.nl
UNITED KINGDOM:
T: +31 (0)30 291 98 47. Email: sales@ddtech.nl
If there is a problem or you have a question about this particular product please let us know here.